Digital Torque Tester ,electronic torque wrench tester,electronic torque tester

Peak measurement range 0.015 ~ 1.000(N.m); 0.15 ~ 9.00 (lbf.in);0.15 ~ 10.00 (kgf.cm)

HP-10 Digital Torque Tester ,electronic torque tester,screw torque tester,

Peak measurement rangeAccuracyDimensions (mm)WeightPower (charging time)

0.015 ~ 1.000(N.m);0.15 ~ 9.00 (lbf.in);0.15 ~ 10.00 (kgf.cm)

within ± 0.5% (.)

124 (W) * 230 (D) * 65 (H)

1.8kg

1.2V Ni-Cd battery * 5 (8 hours charging time)

The HP-100 & HP-10 bench mount torque tester has a wide torque measurement range and come complete with two spring rundown joints and a protective carrying case. The tester can store 800 data points and allows the user to enter high / low torque limits for Good/NG indication during testing. Built-in statistical calculations allow the user to review min, max, and average values for a series of up to 30 torque readings.

•1% i.v. accuracy from 10-100% of full scale

•Operating modes: Track, Peak, Initial Peak

•Selectable measuring units: Kgf.cm, Nm, Lbf.in

•Stores up to 800 torque readings

•Output torque data via on-board USB connection (cable not included)

•Selectable auto-zero function

•Settable hi/lo torque limits: after rundown meter will indicate Good (green LED) or NG (red LED)

•Calculate and display Min, Max, and Ave torque statistics (for up to 30 data points)

•Internal rechargeable battery pack and AC adapter

•Approx charge time 8 hrs, run time approx. 30 hrs on full charge

•Includes 2 rundown joints, carrying case and NIST Certificate of Calibration

•Not for use with impact tools

Digital Torque Tester ,electronic torque wrench tester,electronic torque tester